The use and maintenance of the rebonded foam machine(rebonding foam machine) should pay attention to several aspects:
I. Crusher Operation
Before starting the foam shredder machine, confirm the size of the sieve screen and clean any residual corners and edges inside the machine.
Prior to starting the machine, activate the fan first and then open the crusher to prevent material blockage in the crushing pipeline.
For machines equipped with magnetic iron absorption, check if the magnetic iron at the entrance of the crusher is secure to prevent damage from metal pieces.
II. Cleaning of Material Storage
Whenever the size of foam scrap and the density of rebonded foam are inconsistent, every corner of the material storage area must be thoroughly cleaned. Any large particles mixed with fine ones may affect the quality of rebonded foam and result in losses.
III. Usage and Maintenance of Foaming mold
After daily use, clean the residual waste at the bottom of the mold to prevent premature aging of the container.
Every 3-5 months, clean the residues in the mixing mold based on usage. In cases of stubborn residues, methane dilution can be used.
The automatic glue application pipeline must undergo a daily methane circulation. If the glue spray pipeline is well-maintained, it can be replaced annually.